The W-Line water-cooled condensing unit can be applied where air cooled units are not desirable or space is unavailable. This unit can operate with tower or city water and its size will allow operation in a minimum space; Shell and tube condensers are standard. The unit is complete with high efficiency accessible semi-hermetic compressors.

 

• Sturdy electrical control box with compressor contactor and fused control circuit

• Spring mounted, accessible semi-hermetic compressor

• Sealed liquid line filter drier and sight glass on 5.0 hp – up

• Discharge vibration eliminator

• Copper tubing secured with Hydra-Zorb / Cush- A-Clamp

• Shell and tube water cooled condenser with fusible plug or pressure relief valve and liquid shut off valve

• Adjustable dual high / low pressure control

• Oil failure control on all applicable models

• Demand CoolingTM on R22 low temp. models

• Suction and discharge service valve

 

 

Optional Features (Factory Mounted):
• Suction accumulator

• Sealed or replaceable core suction filter with vibration eliminator

• Oil separator c/w oil return solenoid valve

• Sealed liquid line filter drier and sight glass

• Replaceable core liquid line filter drier and sight glass

• Liquid line solenoid valve with 230 volt coil (shipped loose)

• Ball valve (shipped loose)

• SentronicTM oil failure control

• Flex hose on all controls

• Compressor circuit breaker

• Compressor time delay relay

• Pump down toggle switch

• Time clock

• Defrost contactor with fuse block

• Evaporator fan contactor with fuse block

• Fused disconnect

• Phase / voltage monitor

• Water valve (shipped loose)

• Marine duty (cupro-nickel) condenser

  • High, medium and low temperature applications.
  • Outdoor water cooled

  • Sizes range from 1/2 HP to 40 HP for high, medium and low temperature applications

  • 208-230/1/60
  • 208-230/3/60
  • 460/3/60
  • 575/3/60
  • 200-220/1/50
  • 200-220/3/50
  • 380-400/3/50